InvisiCab® aims to eliminate bathroom clutter by creating an ‘invisible’ storage solution. Its sleek, minimal design conceals your toiletries and maintains aesthetic appeal in your bathroom.

InvisiCab® arose from the desire to reduce bathroom clutter by creating an ‘invisible’ storage solution. Experience the freedom to design the bathroom you want without compromising on style and aesthetic appeal.

InvisiCab® Features

Sleek Storage

Built into the wall frame and concealed with tiles, InvisiCab® is the perfect storage piece for minimalist bathrooms.

Mirror Finish

The whole interior of InvisiCab® has a polished mirror finish for added convenience when shaving in the shower.

Push Open/Close Mechanism

High quality, push-to-open, push-to-close mechanism that will withstand the rigours of daily use.

Water Glides Away

The bottom shelf edge is designed with an angled descent to allow water to easily glide off the surface and reduce cleaning.

Suits Standard Tiles

InvisiCab®  is designed to suit standard 300mm tiles to provide an ‘invisible’ look for your bathroom storage.

316 Grade Stainless Steel

The entire cabinet body is made from 316 marine-grade stainless steel to resist water corrosion.

Reduce Clutter
Reduce Clutter

InvisiCab® Sizes

InvisiCab 300

InvisiCab 600

InvisiCab 300

InvisiCab 600

Installation

Both InvisiCab® sizes are designed to fit within the timber stud wall at the time of construction or renovation of your bathroom. Once installed inside the timber frame, the wall is then waterproofed and tiled to give a sleek, invisible‑look for your storage cabinet.

Installation

Both InvisiCab® sizes are designed to fit within the timber stud wall at the time of construction or renovation of your bathroom. Once installed inside the timber frame, the wall is then waterproofed and tiled to give a sleek, invisible‑look for your storage cabinet.

InvisiCab® FAQ

InvisiCab® is designed to fit within the timber stud wall at the time of construction or renovation of your bathroom. When installed inside the timber frame, the wall is then waterproofed and tiled to give a sleek ‘invisible’ look for your storage cabinet.

This depends on how much storage space you would like for your shower or bath. There are two cabinet sizes available to suit common tile sizes: 300 x 300 mm or 600 x 300 mm. The tile simply drops into the front of the door frame.

If you are using decorative, mosaic or other tile sizes, then tile cutting may be required. Talk to your tiler or tile supplier at the time of renovation or construction for advice.

InvisiCab® is designed to fit the most common timber stud wall framing at a depth of 90mm. InvisiCab® may also fit a 70mm deep timber frame if there is sufficient space behind for the 90mm deep cabinet to fit.

If unsure, consult your licensed builder for advice.

Yes. It is recommended that the builder follows the installation instructions enclosed with the product.

No. Installation of InvisiCab® requires the removal of existing tile work and access to the timber stud wall for installation.

InvisiCab® features an internal polished mirror finish that is susceptible to scratches if not cared for properly. We recommend using a non-abrasive, specially formulated stainless steel cleaner and microfibre cloth to ensure a smooth, streak and scratch-free finish. Avoid the use of citrus-based cleaners or metal scourers as they will scratch and damage the polished mirror surface.

Please note that some residue may remain once the protective film is removed from the polished inner surface, and can be cleaned following the method above.